![]() We took new measurements with the setting set to '60Hz'. This duplication was caused by sending a 60Hz signal with the Refresh Rate setting set to '165Hz' in the monitor's OSD. Update : We retook the response time measurements at 60Hz, as we noticed that there was a frame duplication issue with the data. If you have this monitor and experience the same issues, let us know. We also confirmed that G-SYNC works properly, but once we enabled FreeSync and disabled it again, G-SYNC was also disabled in the Control Panel.Įssentially, if you plan on using VRR, make sure your refresh rate setting on the monitor is 120 or 165Hz otherwise, it won't work properly. Normally, if FreeSync is enabled in the OSD, we don't have access to the response time and refresh rate settings on the monitor, but with G-SYNC enabled in the Control Panel, we had access to those settings on the monitor. The max refresh rate over HDMI is 100Hz, and FreeSync doesn't work at all over HDMI we confirmed with our Xbox Series X, and it showed VRR as incompatible with the monitor.Īnother anomaly that we encountered is when turning off FreeSync in the OSD, G-SYNC was still enabled in the NVIDIA Control Panel. ![]() However, if you set it to 100Hz, VRR only works between 60-100Hz. However, if you set both the monitor's and PC's settings to 165Hz, there aren't any VRR issues throughout the entire refresh rate range.Īlso, if you set the monitor's refresh rate to 120Hz, there aren't any issues with VRR. If you set your PC's refresh rate to 60Hz and enable FreeSync in the monitor's OSD, VRR doesn't work properly, and there's screen tearing throughout. However, we ran into some issues with the refresh rate and VRR. The Samsung G5 34 has a high 165Hz refresh rate with native FreeSync support, and it's also G-SYNC compatible. You won't notice this if your computer can maintain a high refresh rate, but if the frame rate decreases, it's distracting with some scenes. Update : Unfortunately, this monitor flickers in dark scenes when G-SYNC is enabled, and the frame rate drops. If you have this monitor and notice a lower contrast ratio, let us know. We measured the contrast of the monitor after calibration using the following settings: We then repeated the tests with different test equipment, and again got similar numbers. While we first measured it with our regular checkboard pattern method, we also measured it with full black and full white screens and received similar results. The contrast is much higher than the advertised 2500:1, but we verified that this is correct. We also noticed the Samsung Odyssey G7 has a higher contrast than advertised, but again, this can vary from unit to unit. It's much higher than the Samsung Odyssey G5 C27G55T, but this is something that varies between units. It displays deep blacks when viewed in the dark, which is expected from a VA panel.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |